At a glance
Fire shutters in Gloucester (GL1) supplied and fitted with their control panel, warning devices and alarm release, then drop-tested and handed over with commissioning records for your fire safety file.
- Town
- Gloucester
- Postcode district
- GL1
- Area
- Gloucestershire
- Survey
- Free for new installations
Options that matter on site
- Tested products. Every shutter comes with its maker's furnace test or assessment evidence and performance declaration.
- Alarm interface. We agree the cause-and-effect with your alarm contractor and prove the release at commissioning.
- Records. You receive records of the installation, commissioning and first drop test for your files.
- Daily-use models. Where needed, the shutter can be motorised for daily traffic and still close on alarm.
- Fail-safe closing. If the alarm sounds or the power goes, the shutter drops at a governed speed and closes the opening.
Typical scopes of work
- Replacing an obsolete kitchen servery fire shutter with a new shutter released by the fire alarm panel.
- Fitting a 120-minute fire shutter to a conveyor opening between production and storage compartments, released by the fire alarm.
- Fitting battery back-up, a beacon and a sounder to a new fire shutter on a service corridor.
Fire shutter law in England
A fire shutter only does its job if it closes when needed. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must keep fire safety equipment maintained in efficient working order, and keeping test records is the usual way to show it. Shutters must also stay as the manufacturer tested and certified them, so repairs should use the right parts. In Gloucester, the enforcing authority is the local fire and rescue authority.
Planning the work around your site
Sites in and around Gloucester vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices for fire shutters
| Item | Guide price (ex VAT) |
|---|---|
| Fire shutter, single, with control panel and fail-safe closing | £4,495 – £11,995 |
| Fire shutter service with drop test, per shutter | £125 – £265 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Fire shutters in Gloucester: your questions
Can you link a fire shutter to our existing alarm in Gloucester?
Usually, yes. We work with your fire alarm contractor to agree the cause-and-effect and the interface, designed to BS 7273-4, and prove the shutter closes on the alarm signal at commissioning.
Do you service fire shutters across Gloucestershire?
Yes. We service and drop-test fire shutters across Gloucestershire, including most makes we did not install, and provide a written report for each shutter. Servicing visits are chargeable at a fixed price per shutter.
Who maintains a fire shutter at our Gloucester premises?
The person in control of the premises: the responsible person in England and Wales, the dutyholder in Scotland, or in Northern Ireland the person with fire safety duties. Check your lease to see whether landlord or tenant arranges servicing.
Fire shutters near Gloucester
Working in Gloucester? We also take on jobs in Cheltenham, Stroud, Tewkesbury and across Gloucestershire.
- Fire shutters in Cheltenham
- Fire shutters in Stroud
- Fire shutters in Tewkesbury
- Fire shutters in Ledbury
- Fire shutters in Ross-on-Wye
- Fire shutters in Cirencester
Other services in Gloucester
- Planned maintenance contracts
- Industrial roller shutters
- Complete loading bays
- Cold store and freezer doors
- PVC strip curtains
- Door automation and controls
- Dock levellers
- Dock leveller and loading bay repairs
More about Fire shutters · industrial doors in Gloucester. Last updated 19 October 2026.
