Fire shutters in Birkenhead

In short

Replacing an ageing fire shutter in Birkenhead? We check the wall still suits the new shutter's tested specification, fit it with fire-stopping as detailed and prove it closes on alarm before we leave.

Town: Birkenhead
Postcode district: CH41
Area: Merseyside
Survey: Free for new installations

What to specify

Records. You receive records of the installation, commissioning and first drop test for your files.
Battery back-up. Back-up units maintain controlled closing during a mains failure.
Tested products. Every shutter comes with its maker's furnace test or assessment evidence and performance declaration.
Fail-safe closing. If the alarm sounds or the power goes, the shutter drops at a governed speed and closes the opening.
Warning devices. Sounders and beacons to warn people before and during descent.

Typical scopes of work

Fitting battery back-up, a beacon and a sounder to a new fire shutter on a service corridor.
Fitting a 120-minute fire shutter to a conveyor opening between production and storage compartments, released by the fire alarm.
Supplying a fire shutter to a fire engineer's specification on a new-build unit, timed to the main contractor's programme.

Fire safety duties for shutters in Birkenhead

In England, fire shutters are part of the fire precautions the responsible person must keep maintained under the Regulatory Reform (Fire Safety) Order 2005: in efficient working order and in good repair. Testing at suitable intervals and keeping the results is expected good practice and supports your fire risk assessment. Enforcement in Birkenhead is by the local fire and rescue authority.

How the work is organised

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Prices for fire shutters in Birkenhead

Fire shutters guide prices
Item	Guide price (ex VAT)
Fire shutter, single, with control panel and fail-safe closing	£4,495 – £11,995
Fire shutter service with drop test, per shutter	£125 – £265

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about fire shutters

How much does a fire shutter cost in Birkenhead?

Our guide price for a single fire shutter with control panel and fail-safe closing is £4,495 to £11,995 ex VAT, supplied and fitted. Size, rating and alarm interface set the final figure, which we confirm in writing after a free survey in Birkenhead.

Can you link a fire shutter to our existing alarm in Birkenhead?

Usually, yes. We work with your fire alarm contractor to agree the cause-and-effect and the interface, designed to BS 7273-4, and prove the shutter closes on the alarm signal at commissioning.

How long does fire shutter installation take at a Birkenhead site?

A single shutter is typically fitted in one to two days, with commissioning and alarm testing on top. Lead times for fire-rated products are confirmed with the quote, and work is planned around your operations.

Fire shutters near Birkenhead

Besides Birkenhead, we can survey and quote for sites in Liverpool, Wallasey, Bebington and the rest of Merseyside.

Other services in Birkenhead

More about Fire shutters · industrial doors in Birkenhead. Last updated 19 October 2026.