The short version
Replacing an ageing fire shutter in Selby? We check the wall still suits the new shutter's tested specification, fit it with fire-stopping as detailed and prove it closes on alarm before we leave.
- Town
- Selby
- Postcode district
- YO8
- Area
- North Yorkshire
- Survey
- Free for new installations
What we fit in Selby
- Daily-use models. Motorised fire shutters that also work as everyday doors.
- Warning devices. Sounders and beacons to warn people before and during descent.
- Battery back-up. Back-up units maintain controlled closing during a mains failure.
- Certified install. Fitted strictly to the manufacturer's specification for fixings, wall type and fire-stopping.
- Tested products. Shutters supplied with the manufacturer's fire test evidence and Declaration of Performance.
Typical scopes of work
- Building up a blockwork wall to the tested construction before fitting a new compartment fire shutter.
- Supplying a fire shutter to a fire engineer's specification on a new-build unit, timed to the main contractor's programme.
- Fitting battery back-up, a beacon and a sounder to a new fire shutter on a service corridor.
Fire safety duties for shutters in Selby
In England, fire shutters are part of the fire precautions the responsible person must keep maintained under the Regulatory Reform (Fire Safety) Order 2005: in efficient working order and in good repair. Testing at suitable intervals and keeping the results is expected good practice and supports your fire risk assessment. Enforcement in Selby is by the local fire and rescue authority.
Access, phasing and timing
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Prices for fire shutters in Selby
| Item | Guide price (ex VAT) |
|---|---|
| Fire shutter, single, with control panel and fail-safe closing | £4,495 – £11,995 |
| Fire shutter service with drop test, per shutter | £125 – £265 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Can a fire shutter in Selby be fitted to any wall?
No. It must be fitted to a wall of the type covered by the manufacturer's test evidence, with fire-stopping as detailed. If your wall differs, we explain what building work is needed before the shutter is ordered.
Can you link a fire shutter to our existing alarm in Selby?
Usually, yes. We work with your fire alarm contractor to agree the cause-and-effect and the interface, designed to BS 7273-4, and prove the shutter closes on the alarm signal at commissioning.
Who maintains a fire shutter at our Selby premises?
The person in control of the premises: the responsible person in England and Wales, the dutyholder in Scotland, or in Northern Ireland the person with fire safety duties. Check your lease to see whether landlord or tenant arranges servicing.
Fire shutters near Selby
Besides Selby, we can survey and quote for sites in Goole, Pontefract, York and the rest of North Yorkshire.
- Fire shutters in Goole
- Fire shutters in Pontefract
- Fire shutters in York
- Fire shutters in Castleford
- Fire shutters in Doncaster
- Fire shutters in Wakefield
Other services in Selby
- Steel personnel and fire exit doors
- Door automation and controls
- High-speed doors
- Planned maintenance contracts
- Dock leveller and loading bay repairs
- Industrial door replacement
- Sectional overhead doors
- Sliding and folding industrial doors
More about Fire shutters · industrial doors in Selby. Last updated 19 October 2026.