Industrial door replacement in Selby

In short

Is an old door at your Selby site costing more in repairs than it is worth? We price replacement alongside repair so you can compare, then handle the whole changeover if replacement makes sense.

Town: Selby
Postcode district: YO8
Area: North Yorkshire
Survey: Free for new installations

What we fit in Selby

Right door type. Like-for-like or an upgrade to suit how the opening is used now.
Ongoing servicing. We can service the new door from the start so its history begins on day one.
Commissioning. Safety devices tested, forces measured and instructions handed over.
Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.
Disposal. We take the old door away so there is nothing left on site to deal with.

Typical scopes of work

Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Phasing the replacement of several loading doors so only one bay is out of use at a time.

Powered door rules that apply in Selby

Selby is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial door replacement

Can we change door type when replacing at our Selby unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Do you replace doors at multiple sites across North Yorkshire?

Yes. We replace doors across North Yorkshire, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.

How long will our opening in Selby be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

Industrial door replacement near Selby

Besides Selby, we can survey and quote for sites in Goole, Pontefract, York and the rest of North Yorkshire.

Other services in Selby

More about Industrial door replacement · industrial doors in Selby. Last updated 19 October 2026.