Quick answer
Replacing an ageing fire shutter in Kenilworth? We check the wall still suits the new shutter's tested specification, fit it with fire-stopping as detailed and prove it closes on alarm before we leave.
- Town
- Kenilworth
- Postcode district
- CV8
- Area
- Warwickshire
- Survey
- Free for new installations
What to specify
- Certified install. Fitted strictly to the manufacturer's specification for fixings, wall type and fire-stopping.
- Tested products. Shutters supplied with the manufacturer's fire test evidence and Declaration of Performance.
- Fail-safe closing. If the alarm sounds or the power goes, the shutter drops at a governed speed and closes the opening.
- Warning devices. Sounders and beacons to warn people before and during descent.
- Alarm interface. We agree the cause-and-effect with your alarm contractor and prove the release at commissioning.
What this work can involve
- Fitting a 120-minute fire shutter to a conveyor opening between production and storage compartments, released by the fire alarm.
- Fitting battery back-up, a beacon and a sounder to a new fire shutter on a service corridor.
- Replacing an obsolete kitchen servery fire shutter with a new shutter released by the fire alarm panel.
Who must keep fire shutters working at a site in Kenilworth?
The responsible person, usually the employer, owner or managing agent, has the duty under the Regulatory Reform (Fire Safety) Order 2005. Your fire risk assessment should list each shutter, how it is released and how often it is tested, and the local fire and rescue authority may ask how the shutters are maintained.
Keeping your site running during the work
Sites in and around Kenilworth vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Fire shutter, single, with control panel and fail-safe closing | £4,495 – £11,995 |
| Fire shutter service with drop test, per shutter | £125 – £265 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Can a fire shutter in Kenilworth be fitted to any wall?
No. It must be fitted to a wall of the type covered by the manufacturer's test evidence, with fire-stopping as detailed. If your wall differs, we explain what building work is needed before the shutter is ordered.
Can you link a fire shutter to our existing alarm in Kenilworth?
Usually, yes. We work with your fire alarm contractor to agree the cause-and-effect and the interface, designed to BS 7273-4, and prove the shutter closes on the alarm signal at commissioning.
Do you service fire shutters across Warwickshire?
Yes. We service and drop-test fire shutters across Warwickshire, including most makes we did not install, and provide a written report for each shutter. Servicing visits are chargeable at a fixed price per shutter.
Fire shutters near Kenilworth
Our teams cover Kenilworth (CV8) and nearby Warwick, Coventry, Leamington Spa, along with the rest of Warwickshire.
- Fire shutters in Warwick
- Fire shutters in Coventry
- Fire shutters in Leamington Spa
- Fire shutters in Solihull
- Fire shutters in Bedworth
- Fire shutters in Shirley
Other services in Kenilworth
- Steel personnel and fire exit doors
- Fire shutter servicing and drop tests
- Planned maintenance contracts
- Industrial door replacement
- Complete loading bays
- Door safety upgrades
- Door automation and controls
- Dock shelters and seals
More about Fire shutters · industrial doors in Kenilworth. Last updated 19 October 2026.