In short
Large openings at sites in Swadlincote (DE11) need doors engineered for wind, weight and structure. We specify the running gear, drives and safety devices to suit, then install and commission the complete door.
- Town
- Swadlincote
- Postcode district
- DE11
- Area
- Derbyshire
- Survey
- Free for new installations
What we fit in Swadlincote
- Load path. Bottom-rolling on floor rails or top-hung from the structure, agreed with your engineer.
- Designed per opening. Each door engineered around the opening size, structure and site wind exposure.
- Drives and controls. Powered leaves with controls to suit the site, plus a way to move the door if power is lost.
- Vertical-lift fabric. Reinforced fabric curtains with wind bars that fold up beneath the lintel.
- Refurbishment. Older hangar doors renewed with new wheels, guides, drives and cladding.
Jobs we can carry out
- Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
- Designing multi-leaf sliding doors, with a tail-fin cut-out where needed, for a hangar or large-span maintenance building.
- Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.
Who is responsible for door safety at a site in Swadlincote?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Planning the work around your site
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Hangar and large-span doors in Swadlincote: your questions
Do you service large doors across Derbyshire?
Yes. We service and repair hangar and large-span doors across Derbyshire, including running gear, drives, controls and safety devices. Service and repair visits are chargeable and quoted before work starts.
Can you refurbish our existing hangar doors in Swadlincote?
Often, yes. If the leaves are sound, we renew wheels, guides, drives, cladding and safety devices. Where distortion or corrosion is severe, we explain why replacement may be better value.
How much does a hangar door cost in Swadlincote?
Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Swadlincote, we confirm a fixed price in writing.
Hangar and large-span doors near Swadlincote
Working in Swadlincote? We also take on jobs in Burton upon Trent, Coalville, Derby and across Derbyshire.
- Hangar and large-span doors in Burton upon Trent
- Hangar and large-span doors in Coalville
- Hangar and large-span doors in Derby
- Hangar and large-span doors in Tamworth
- Hangar and large-span doors in Lichfield
- Hangar and large-span doors in Long Eaton
Other services in Swadlincote
- Cold store and freezer doors
- Complete loading bays
- Industrial door installation
- Fire shutter servicing and drop tests
- Industrial roller shutters
- Dock shelters and seals
- Industrial door repairs
- Industrial door replacement
More about Hangar and large-span doors · industrial doors in Swadlincote. Last updated 19 October 2026.