Quick answer
If your sliding hangar doors in Burton upon Trent have become heavy, noisy or hard to move, we can renew wheels, guides and drives, or replace the doors with a modern large-span system if refurbishment no longer makes sense.
- Town
- Burton upon Trent
- Postcode district
- DE14
- Area
- Staffordshire
- Survey
- Free for new installations
What to specify
- Wind resistance. Closed doors are designed to resist the wind pressure your site can see without jamming.
- Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.
- Safety systems. Large doors move a lot of mass, so warning and detection devices are built in from the start.
- Vertical-lift fabric. Tall openings with little side space can use a fabric door that lifts and folds into a compact stack.
- Drives and controls. Powered leaves with controls to suit the site, plus a way to move the door if power is lost.
Examples of work we can quote for
- Fitting a vertical-lift fabric door to a tall vehicle maintenance shed where adjoining buildings take up the side space.
- Coordinating floor rail installation with the groundworks contractor before new large-span door leaves arrive on site.
- Installing heavy-duty sectional doors with wind-resistant panels across the frontage of a bus or coach garage.
Safety law for industrial doors in England
Industrial doors in Burton upon Trent are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Access, phasing and timing
For busy sites in Staffordshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.
Guide prices for hangar and large-span doors
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Can you refurbish our existing hangar doors in Burton upon Trent?
Often, yes. If the leaves are sound, we renew wheels, guides, drives, cladding and safety devices. Where distortion or corrosion is severe, we explain why replacement may be better value.
How long would a large-span door installation take in Burton upon Trent?
After design and manufacture, installation typically takes from several days to a few weeks depending on the number of leaves and any structural work. The full programme is set out with the quote.
How much does a hangar door cost in Burton upon Trent?
Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Burton upon Trent, we confirm a fixed price in writing.
Hangar and large-span doors near Burton upon Trent
Burton upon Trent is in the DE14 postcode district in Staffordshire. We also cover Swadlincote, Derby, Lichfield.
- Hangar and large-span doors in Swadlincote
- Hangar and large-span doors in Derby
- Hangar and large-span doors in Lichfield
- Hangar and large-span doors in Tamworth
- Hangar and large-span doors in Rugeley
- Hangar and large-span doors in Coalville
Other services in Burton upon Trent
- High-speed doors
- Steel personnel and fire exit doors
- Industrial door repairs
- Bollards and door protection
- Industrial door installation
- Sliding and folding industrial doors
- Complete loading bays
- Cold store and freezer doors
More about Hangar and large-span doors · industrial doors in Burton upon Trent. Last updated 19 October 2026.