Hangar and large-span doors in Stockton-on-Tees

At a glance

From a single wide plant-shed door to a full hangar frontage, we can design and fit large-span doors in Stockton-on-Tees, coordinating floor rails, steelwork and controls so the whole opening works as one system.

Town: Stockton-on-Tees
Postcode district: TS18
Area: County Durham
Survey: Free for new installations

What to specify

Refurbishment. Older hangar doors renewed with new wheels, guides, drives and cladding.
Designed per opening. Each door engineered around the opening size, structure and site wind exposure.
Safety systems. Large doors move a lot of mass, so warning and detection devices are built in from the start.
Wind resistance. Leaves, guides and fixings designed for the wind load on the closed door.
Load path. Bottom-rolling on floor rails or top-hung from the structure, agreed with your engineer.

Typical scopes of work

Installing heavy-duty sectional doors with wind-resistant panels across the frontage of a bus or coach garage.
Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
Surveying and specifying a very wide sliding or folding door for a building that houses large plant and machinery.

Who is responsible for door safety at a site in Stockton-on-Tees?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Sites in and around Stockton-on-Tees vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Prices for hangar and large-span doors in Stockton-on-Tees

Hangar and large-span doors guide prices
Item	Guide price (ex VAT)
Hangar and large-span doors	on survey (typically from £39,995)

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Stockton-on-Tees

How much does a hangar door cost in Stockton-on-Tees?

Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Stockton-on-Tees, we confirm a fixed price in writing.

Do you work on hangar door projects with our engineer in Stockton-on-Tees?

Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.

Which hangar door type would suit our building in Stockton-on-Tees?

It depends on headroom, side space, structure and how often the door moves. Sliding doors need side space, vertical-lift fabric doors need headroom, and large sectional doors suit big but not extreme openings. We recommend after survey.

Hangar and large-span doors near Stockton-on-Tees

Our teams cover Stockton-on-Tees (TS18) and nearby Billingham, Thornaby-on-Tees, Middlesbrough, along with the rest of County Durham.

Other services in Stockton-on-Tees

More about Hangar and large-span doors · industrial doors in Stockton-on-Tees. Last updated 19 October 2026.