Hangar and large-span doors in Newton Aycliffe

The short version

If your sliding hangar doors in Newton Aycliffe have become heavy, noisy or hard to move, we can renew wheels, guides and drives, or replace the doors with a modern large-span system if refurbishment no longer makes sense.

Town: Newton Aycliffe
Postcode district: DL5
Area: County Durham
Survey: Free for new installations

Options that matter on site

Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.
Refurbishment. Sound but tired doors can be brought back with new running gear, drives and safety devices.
Multi-leaf sliding. Classic hangar doors with leaves that slide on parallel tracks and stack clear of the opening.
Load path. We decide with your structural engineer whether the slab or the structure carries the door's weight.
Wind resistance. Leaves, guides and fixings designed for the wind load on the closed door.

What this work can involve

Installing heavy-duty sectional doors with wind-resistant panels across the frontage of a bus or coach garage.
Coordinating floor rail installation with the groundworks contractor before new large-span door leaves arrive on site.
Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.

Who is responsible for door safety at a site in Newton Aycliffe?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for hangar and large-span doors in Newton Aycliffe

Hangar and large-span doors guide prices
Item	Guide price (ex VAT)
Hangar and large-span doors	on survey (typically from £39,995)

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

How long would a large-span door installation take in Newton Aycliffe?

After design and manufacture, installation typically takes from several days to a few weeks depending on the number of leaves and any structural work. The full programme is set out with the quote.

Can you refurbish our existing hangar doors in Newton Aycliffe?

Often, yes. If the leaves are sound, we renew wheels, guides, drives, cladding and safety devices. Where distortion or corrosion is severe, we explain why replacement may be better value.

Do you work on hangar door projects with our engineer in Newton Aycliffe?

Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.

Hangar and large-span doors near Newton Aycliffe

Working in Newton Aycliffe? We also take on jobs in Bishop Auckland, Darlington, Stockton-on-Tees and across County Durham.

Other services in Newton Aycliffe

More about Hangar and large-span doors · industrial doors in Newton Aycliffe. Last updated 19 October 2026.