The short version
From a single wide plant-shed door to a full hangar frontage, we can design and fit large-span doors in Battersea, coordinating floor rails, steelwork and controls so the whole opening works as one system.
- Town
- Battersea
- Postcode district
- SW11
- Area
- Greater London
- Survey
- Free for new installations
Options for hangar and large-span doors in Battersea
- Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.
- Safety systems. Edge protection, photocells, warning lights, sounders and interlocks.
- Designed per opening. Each door engineered around the opening size, structure and site wind exposure.
- Wind resistance. Closed doors are designed to resist the wind pressure your site can see without jamming.
- Refurbishment. Sound but tired doors can be brought back with new running gear, drives and safety devices.
Jobs we can carry out
- Adding warning beacons, sounders and photocells to an older powered large-span door as part of a site risk assessment review.
- Coordinating floor rail installation with the groundworks contractor before new large-span door leaves arrive on site.
- Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
Who is responsible for door safety at a site in Battersea?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices for hangar and large-span doors
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Battersea
Do you work on hangar door projects with our engineer in Battersea?
Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.
Which hangar door type would suit our building in Battersea?
It depends on headroom, side space, structure and how often the door moves. Sliding doors need side space, vertical-lift fabric doors need headroom, and large sectional doors suit big but not extreme openings. We recommend after survey.
Can a large door at our Battersea site be operated without power?
Most powered large doors include a manual or emergency means of operation for power failures. How it works depends on the door type and size, and we explain it at handover and in the user instructions.
Hangar and large-span doors near Battersea
Our teams cover Battersea (SW11) and nearby Chelsea, Pimlico, Westminster, along with the rest of Greater London.
- Hangar and large-span doors in Chelsea
- Hangar and large-span doors in Pimlico
- Hangar and large-span doors in Westminster
- Hangar and large-span doors in Fulham
- Hangar and large-span doors in Brixton
- Hangar and large-span doors in London
Other services in Battersea
- Dock shelters and seals
- Dock levellers
- Insulated roller shutter doors
- Cold store and freezer doors
- Bollards and door protection
- Impact traffic doors
- Sliding and folding industrial doors
- Fire shutters
More about Hangar and large-span doors · industrial doors in Battersea. Last updated 19 October 2026.