At a glance
If your sliding hangar doors in Gwent have become heavy, noisy or hard to move, we can renew wheels, guides and drives, or replace the doors with a modern large-span system if refurbishment no longer makes sense.
- Area
- Gwent
- Nation
- Wales
- Main town
- Newport (Gwent)
- Survey
- Free for new installations
What to specify
- Drives and controls. Electric drives per leaf or central, with manual or emergency operation.
- Wind resistance. Leaves, guides and fixings designed for the wind load on the closed door.
- Safety systems. Large doors move a lot of mass, so warning and detection devices are built in from the start.
- Vertical-lift fabric. Reinforced fabric curtains with wind bars that fold up beneath the lintel.
- Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.
Examples of work we can quote for
- Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.
- Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
- Surveying and specifying a very wide sliding or folding door for a building that houses large plant and machinery.
Who is responsible for door safety at a site in Gwent?
In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Planning the work around your site
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Budgeting for hangar and large-span doors in Gwent
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about hangar and large-span doors
Do you service large doors across Wales?
Yes. We service and repair hangar and large-span doors across Wales, including running gear, drives, controls and safety devices. Service and repair visits are chargeable and quoted before work starts.
Can you refurbish our existing hangar doors in Gwent?
Often, yes. If the leaves are sound, we renew wheels, guides, drives, cladding and safety devices. Where distortion or corrosion is severe, we explain why replacement may be better value.
How long would a large-span door installation take in Gwent?
After design and manufacture, installation typically takes from several days to a few weeks depending on the number of leaves and any structural work. The full programme is set out with the quote.
Towns in Gwent we cover
We cover 7 towns in Gwent for hangar and large-span doors, including Newport (Gwent), Cwmbran, Pontypool, Ebbw Vale.
Other services in Gwent
- Cold store and freezer doors
- Dock levellers
- Industrial door motor replacement
- PVC strip curtains
- Planned maintenance contracts
- Bollards and door protection
- Industrial roller shutters
- Door safety upgrades
More about Hangar and large-span doors. Last updated 19 October 2026.
