At a glance
We can supply, install and refurbish large-span doors across Gwent where standard industrial doors stop, from hangars and rail sheds to heavy plant workshops, with a free survey for sites in Abergavenny.
- Town
- Abergavenny
- Postcode district
- NP7
- Area
- Gwent
- Survey
- Free for new installations
Options that matter on site
- Refurbishment. Older hangar doors renewed with new wheels, guides, drives and cladding.
- Wind resistance. Closed doors are designed to resist the wind pressure your site can see without jamming.
- Drives and controls. Electric drives per leaf or central, with manual or emergency operation.
- Vertical-lift fabric. Reinforced fabric curtains with wind bars that fold up beneath the lintel.
- Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.
Jobs we can carry out
- Designing multi-leaf sliding doors, with a tail-fin cut-out where needed, for a hangar or large-span maintenance building.
- Adding warning beacons, sounders and photocells to an older powered large-span door as part of a site risk assessment review.
- Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.
Who is responsible for door safety at a site in Abergavenny?
In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Prices for hangar and large-span doors in Abergavenny
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
How much does a hangar door cost in Abergavenny?
Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Abergavenny, we confirm a fixed price in writing.
Do you service large doors across Gwent?
Yes. We service and repair hangar and large-span doors across Gwent, including running gear, drives, controls and safety devices. Service and repair visits are chargeable and quoted before work starts.
Do you work on hangar door projects with our engineer in Abergavenny?
Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.
Hangar and large-span doors near Abergavenny
Abergavenny is in the NP7 postcode district in Gwent. We also cover Pontypool, Ebbw Vale, Cwmbran.
- Hangar and large-span doors in Pontypool
- Hangar and large-span doors in Ebbw Vale
- Hangar and large-span doors in Cwmbran
- Hangar and large-span doors in Risca
- Hangar and large-span doors in Newport (Gwent)
- Hangar and large-span doors in Merthyr Tydfil
Other services in Abergavenny
- Impact traffic doors
- Industrial roller shutters
- Door automation and controls
- Planned maintenance contracts
- Insulated roller shutter doors
- Industrial door installation
- Dock shelters and seals
- Industrial door replacement
More about Hangar and large-span doors · industrial doors in Abergavenny. Last updated 19 October 2026.