Quick answer
If your sliding hangar doors in Powys have become heavy, noisy or hard to move, we can renew wheels, guides and drives, or replace the doors with a modern large-span system if refurbishment no longer makes sense.
- Area
- Powys
- Nation
- Wales
- Main town
- Newtown
- Survey
- Free for new installations
Options that matter on site
- Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.
- Wind resistance. Closed doors are designed to resist the wind pressure your site can see without jamming.
- Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.
- Safety systems. Large doors move a lot of mass, so warning and detection devices are built in from the start.
- Refurbishment. Older hangar doors renewed with new wheels, guides, drives and cladding.
What this work can involve
- Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
- Fitting a vertical-lift fabric door to a tall vehicle maintenance shed where adjoining buildings take up the side space.
- Adding warning beacons, sounders and photocells to an older powered large-span door as part of a site risk assessment review.
Powered door rules that apply in Powys
Powys is in Wales, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
How the work is organised
Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.
Budgeting for hangar and large-span doors in Powys
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Powys
Do you service large doors across Wales?
Yes. We service and repair hangar and large-span doors across Wales, including running gear, drives, controls and safety devices. Service and repair visits are chargeable and quoted before work starts.
Do you work on hangar door projects with our engineer in Powys?
Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.
How much does a hangar door cost in Powys?
Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Powys, we confirm a fixed price in writing.
Towns in Powys we cover
We cover 5 towns in Powys for hangar and large-span doors, including Newtown, Brecon, Ystradgynlais, Welshpool.
Other services in Powys
- Complete loading bays
- Fire shutter servicing and drop tests
- Sectional overhead doors
- Sliding and folding industrial doors
- Steel personnel and fire exit doors
- Industrial roller shutters
- Impact traffic doors
- Planned maintenance contracts
More about Hangar and large-span doors. Last updated 19 October 2026.