In short
We can install sectional overhead doors in Powys and across Wales, on new industrial units and as replacements for tired roller shutters. Every job starts with a free survey and ends with a commissioned, tested door.
- Area
- Powys
- Nation
- Wales
- Main town
- Newtown
- Survey
- Free for new installations
What we fit in Powys
- Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.
- Vision panels. Glazed rows or full-vision sections bring daylight in and let drivers see the yard.
- Electric drives. Shaft-mounted motors with push-button, remote, loop or radar control, and inverter drives for high-cycle bays.
- Wicket doors. A pass door built into the panels saves opening the whole door for pedestrians; low-threshold options reduce trips.
- Paperwork. You get the manufacturer's Declaration of Performance plus commissioning and test records for your files.
What this work can involve
- Adding induction loops and an inverter drive so forklifts can open a busy internal sectional door without stopping.
- Converting a manual chain-operated sectional door to electric operation with a shaft-mounted motor, safety edge and photocells.
- Supplying sectional doors in a RAL colour matched to the existing cladding as part of a unit refurbishment between tenants.
Powered door rules that apply in Powys
Powys is in Wales, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
For busy sites in Wales the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.
Prices for sectional overhead doors in Powys
| Item | Guide price (ex VAT) |
|---|---|
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Sectional overhead doors in Powys: your questions
How much is a sectional overhead door in Powys?
Our guide price for an electric, 40 mm insulated sectional door up to about 4 × 4.5 m is £3,495 to £8,495 ex VAT, supplied and fitted. The fixed price for your opening in Powys is confirmed in writing after a free survey.
Can you replace a roller shutter with a sectional door at our Powys unit?
Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.
Which safety devices does a powered sectional door in Powys need?
That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.
Towns in Powys we cover
We cover 5 towns in Powys for sectional overhead doors, including Newtown, Brecon, Ystradgynlais, Welshpool.
Other services in Powys
- PVC strip curtains
- Fire shutters
- Dock leveller and loading bay repairs
- Sliding and folding industrial doors
- Bollards and door protection
- Dock shelters and seals
- Fire shutter servicing and drop tests
- Industrial door motor replacement
More about Sectional overhead doors. Last updated 19 October 2026.
