Quick answer
We can install sectional overhead doors in Dyfed and across Wales, on new industrial units and as replacements for tired roller shutters. Every job starts with a free survey and ends with a commissioned, tested door.
- Area
- Dyfed
- Nation
- Wales
- Main town
- Carmarthen
- Survey
- Free for new installations
What we fit in Dyfed
- Wicket doors. Integrated pass doors, including low-threshold versions, for staff access without opening the main door.
- Electric drives. Motorised operation with the controls you need, from a simple push-button station to induction loops and radar.
- Finishes. RAL colours to match cladding, with stucco or woodgrain embossing on the outer skin.
- Track layouts. Standard, low headroom, high lift and vertical lift tracks, chosen after measuring your headroom.
- Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
Typical scopes of work
- Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.
- Adding induction loops and an inverter drive so forklifts can open a busy internal sectional door without stopping.
- Supplying full-vision aluminium sections for a vehicle workshop door so technicians get daylight without opening the door.
Who is responsible for door safety at a site in Dyfed?
In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Planning the work around your site
Sites in and around Dyfed vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Sectional overhead doors in Dyfed: your questions
How soon can a sectional door be fitted in Dyfed?
Sectional doors are made to measure, so the manufacturer's lead time sets the date. We confirm it with the quote, book installation around your operations and fit most single doors in a day once the opening is ready.
Will a sectional door reduce heating costs at our Dyfed premises?
An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.
Which safety devices does a powered sectional door in Dyfed need?
That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.
Towns in Dyfed we cover
We cover 6 towns in Dyfed for sectional overhead doors, including Carmarthen, Llanelli, Ammanford, Aberystwyth.
Other services in Dyfed
- Hangar and large-span doors
- Fire shutter servicing and drop tests
- Planned maintenance contracts
- Insulated roller shutter doors
- Door automation and controls
- Industrial door replacement
- Industrial door repairs
- Industrial door installation
More about Sectional overhead doors. Last updated 19 October 2026.
