The short version
Plant rooms, switch rooms and back doors in Powys need doors that are tough and secure. We fit steel doors with louvres, hinge bolts, multi-point locks and closers to suit each opening.
- Area
- Powys
- Nation
- Wales
- Main town
- Newtown
- Survey
- Free for new installations
Options for steel personnel and fire exit doors in Powys
- Outside access. Key or code access from outside while the exit stays free from inside.
- Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.
- Security options. From hinge bolts to certified security doorsets, the door can be specified to resist attack.
- Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.
- Fire-rated doorsets. Fire-resisting steel doors with the manufacturer's test evidence, fitted to its instructions.
Examples of work we can quote for
- Installing a steel staff entrance door with an overhead closer and keypad access beside a loading bay.
- Replacing a rotted timber fire exit door with a galvanised steel doorset and a BS EN 1125 panic bar.
- Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.
Which workplace rules apply to these doors?
For premises in Powys, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Regulatory Reform (Fire Safety) Order 2005, as it applies in Wales, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.
Access, phasing and timing
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices for steel personnel and fire exit doors
| Item | Guide price (ex VAT) |
|---|---|
| Steel personnel door, single | £845 – £1,795 |
| Steel fire exit door with panic hardware | £1,095 – £2,395 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Steel personnel and fire exit doors in Powys: your questions
Can our Powys fire exit be locked from outside?
Yes. It can be secure from outside, with a key or code device or no external hardware, as long as it always opens from inside using the exit hardware. Never lock or chain a fire exit while people are in the building.
How much is a steel personnel door in Powys?
Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your Powys premises in writing after a free survey.
Do you repair fire exit doors across Wales?
Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Wales. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.
Towns in Powys we cover
We cover 5 towns in Powys for steel personnel and fire exit doors, including Newtown, Brecon, Ystradgynlais, Welshpool.
Other services in Powys
- Bollards and door protection
- Sliding and folding industrial doors
- Insulated roller shutter doors
- Industrial door motor replacement
- Industrial door installation
- Door safety upgrades
- Impact traffic doors
- Sectional overhead doors
More about Steel personnel and fire exit doors. Last updated 19 October 2026.
