Quick answer
If your sliding hangar doors in Fareham have become heavy, noisy or hard to move, we can renew wheels, guides and drives, or replace the doors with a modern large-span system if refurbishment no longer makes sense.
- Town
- Fareham
- Postcode district
- PO16
- Area
- Hampshire
- Survey
- Free for new installations
Options for hangar and large-span doors in Fareham
- Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.
- Multi-leaf sliding. Classic hangar doors with leaves that slide on parallel tracks and stack clear of the opening.
- Wind resistance. Leaves, guides and fixings designed for the wind load on the closed door.
- Load path. Bottom-rolling on floor rails or top-hung from the structure, agreed with your engineer.
- Drives and controls. Powered leaves with controls to suit the site, plus a way to move the door if power is lost.
What this work can involve
- Adding warning beacons, sounders and photocells to an older powered large-span door as part of a site risk assessment review.
- Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.
- Surveying and specifying a very wide sliding or folding door for a building that houses large plant and machinery.
Powered door rules that apply in Fareham
Fareham is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about hangar and large-span doors
How long would a large-span door installation take in Fareham?
After design and manufacture, installation typically takes from several days to a few weeks depending on the number of leaves and any structural work. The full programme is set out with the quote.
Do you service large doors across Hampshire?
Yes. We service and repair hangar and large-span doors across Hampshire, including running gear, drives, controls and safety devices. Service and repair visits are chargeable and quoted before work starts.
How much does a hangar door cost in Fareham?
Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Fareham, we confirm a fixed price in writing.
Hangar and large-span doors near Fareham
Besides Fareham, we can survey and quote for sites in Gosport, Portsmouth, Waterlooville and the rest of Hampshire.
- Hangar and large-span doors in Gosport
- Hangar and large-span doors in Portsmouth
- Hangar and large-span doors in Waterlooville
- Hangar and large-span doors in Cowes
- Hangar and large-span doors in Ryde
- Hangar and large-span doors in Havant
Other services in Fareham
- Door safety upgrades
- Industrial door motor replacement
- Planned maintenance contracts
- Fire shutters
- Dock levellers
- High-speed doors
- Sectional overhead doors
- Steel personnel and fire exit doors
More about Hangar and large-span doors · industrial doors in Fareham. Last updated 19 October 2026.