Hangar and large-span doors in Lerwick

In short

From a single wide plant-shed door to a full hangar frontage, we can design and fit large-span doors in Lerwick, coordinating floor rails, steelwork and controls so the whole opening works as one system.

Town: Lerwick
Postcode district: ZE1
Area: Highlands and Islands
Survey: By arrangement

What to specify

Drives and controls. Powered leaves with controls to suit the site, plus a way to move the door if power is lost.
Load path. Bottom-rolling on floor rails or top-hung from the structure, agreed with your engineer.
Designed per opening. Each door engineered around the opening size, structure and site wind exposure.
Safety systems. Large doors move a lot of mass, so warning and detection devices are built in from the start.
Wind resistance. Leaves, guides and fixings designed for the wind load on the closed door.

Examples of work we can quote for

Designing multi-leaf sliding doors, with a tail-fin cut-out where needed, for a hangar or large-span maintenance building.
Fitting a vertical-lift fabric door to a tall vehicle maintenance shed where adjoining buildings take up the side space.
Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.

Powered door rules that apply in Lerwick

Lerwick is in Scotland, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for hangar and large-span doors in Lerwick

Hangar and large-span doors guide prices
Item	Guide price (ex VAT)
Hangar and large-span doors	on survey (typically from £39,995)

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Guide prices apply to mainland UK sites. For Lerwick, travel and access costs are added and shown in your written quote.

Hangar and large-span doors in Lerwick: your questions

Do you work on hangar door projects with our engineer in Lerwick?

Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.

Which hangar door type would suit our building in Lerwick?

It depends on headroom, side space, structure and how often the door moves. Sliding doors need side space, vertical-lift fabric doors need headroom, and large sectional doors suit big but not extreme openings. We recommend after survey.

Can you refurbish our existing hangar doors in Lerwick?

Often, yes. If the leaves are sound, we renew wheels, guides, drives, cladding and safety devices. Where distortion or corrosion is severe, we explain why replacement may be better value.

Hangar and large-span doors: other towns we cover

Lerwick (ZE1) is covered by arrangement. Travel and access costs for island and remote sites are added and shown in your written quote.

Other services in Lerwick

More about Hangar and large-span doors · industrial doors in Lerwick. Last updated 19 October 2026.