Sliding and folding industrial doors in Lerwick

At a glance

Sliding and folding industrial doors for farms, workshops, vehicle sheds and wide-span buildings in Lerwick. We survey the opening and the structure, then recommend a top-hung or bottom-rolling layout that suits it.

Town: Lerwick
Postcode district: ZE1
Area: Highlands and Islands
Survey: By arrangement

Options for sliding and folding industrial doors in Lerwick

Wide spans. Openings of almost any width split into as many leaves as needed.
Wicket doors. A personnel door within a leaf saves sliding the main door for every visit.
Insulated options. Insulated panel infill and edge seals for heated buildings.
Folding leaves. Where there is little wall either side, folding leaves concertina into a compact stack.
No headroom needed. Leaves move sideways, so nothing coils above or runs under the roof.

Typical scopes of work

Fitting bi-folding doors to a maintenance workshop where overhead gantry cranes rule out a roller shutter or sectional door.
Adding a steel support beam and top-hung track so a sliding door leaves the floor flush for forklifts.
Replacing worn timber sliding doors on a storage building with steel-framed bottom-rolling doors and a wicket door.

Safety law for industrial doors in Scotland

Industrial doors in Lerwick are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Sites in and around Lerwick vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Prices for sliding and folding industrial doors in Lerwick

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Guide prices apply to mainland UK sites. For Lerwick, travel and access costs are added and shown in your written quote.

Questions from businesses in Lerwick

How much do sliding or folding industrial doors cost in Lerwick?

Our guide price is £5,995 to £24,995 ex VAT, supplied and fitted, depending on size, number of leaves, infill and whether the doors are manual or electric. After a free survey in Lerwick we confirm the fixed price in writing.

Which is better for our Lerwick site, top-hung or bottom-rolling?

Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.

How long does it take to fit sliding doors in Lerwick?

A pair of manual sliding doors on a sound structure is usually fitted in a day or two. Large folding doors, electric operation and new steelwork add time, which we set out with your quote.

Sliding and folding industrial doors: other towns we cover

We take on work in Lerwick (ZE1) by arrangement; timing depends on travel and access, and any extra costs are set out in your quote before you commit.

Other services in Lerwick

More about Sliding and folding industrial doors · industrial doors in Lerwick. Last updated 19 October 2026.