Sectional overhead doors in Lerwick

The short version

Sectional doors suit premises in Lerwick that need a well-sealed, insulated opening that stays clear of the yard. We handle the survey, specification, installation and commissioning, then service the door if you want us to.

Town: Lerwick
Postcode district: ZE1
Area: Highlands and Islands
Survey: By arrangement

Options for sectional overhead doors in Lerwick

Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.
Paperwork. You get the manufacturer's Declaration of Performance plus commissioning and test records for your files.
Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
Track layouts. We pick the track after measuring headroom and obstructions, so the door clears lights, sprinklers and crane rails.
Vision panels. Glazed rows or full-vision sections bring daylight in and let drivers see the yard.

Jobs we can carry out

Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.
Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.
Adding induction loops and an inverter drive so forklifts can open a busy internal sectional door without stopping.

Powered door rules that apply in Lerwick

Lerwick is in Scotland, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for sectional overhead doors

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Guide prices apply to mainland UK sites. For Lerwick, travel and access costs are added and shown in your written quote.

Your questions about sectional overhead doors

Can you replace a roller shutter with a sectional door at our Lerwick unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Will a sectional door reduce heating costs at our Lerwick premises?

An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.

Which safety devices does a powered sectional door in Lerwick need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Sectional overhead doors: other towns we cover

Lerwick (ZE1) is covered by arrangement. Travel and access costs for island and remote sites are added and shown in your written quote.

Other services in Lerwick

More about Sectional overhead doors · industrial doors in Lerwick. Last updated 19 October 2026.