Hangar and large-span doors in Lancaster

At a glance

Large openings at sites in Lancaster (LA1) need doors engineered for wind, weight and structure. We specify the running gear, drives and safety devices to suit, then install and commission the complete door.

Town: Lancaster
Postcode district: LA1
Area: Lancashire
Survey: Free for new installations

What to specify

Wind resistance. Leaves, guides and fixings designed for the wind load on the closed door.
Load path. Bottom-rolling on floor rails or top-hung from the structure, agreed with your engineer.
Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.
Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.
Safety systems. Edge protection, photocells, warning lights, sounders and interlocks.

Examples of work we can quote for

Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
Coordinating floor rail installation with the groundworks contractor before new large-span door leaves arrive on site.
Adding warning beacons, sounders and photocells to an older powered large-span door as part of a site risk assessment review.

Who is responsible for door safety at a site in Lancaster?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Sites in and around Lancaster vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Prices for hangar and large-span doors in Lancaster

Hangar and large-span doors guide prices
Item	Guide price (ex VAT)
Hangar and large-span doors	on survey (typically from £39,995)

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Hangar and large-span doors in Lancaster: your questions

How long would a large-span door installation take in Lancaster?

After design and manufacture, installation typically takes from several days to a few weeks depending on the number of leaves and any structural work. The full programme is set out with the quote.

Which hangar door type would suit our building in Lancaster?

It depends on headroom, side space, structure and how often the door moves. Sliding doors need side space, vertical-lift fabric doors need headroom, and large sectional doors suit big but not extreme openings. We recommend after survey.

How much does a hangar door cost in Lancaster?

Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Lancaster, we confirm a fixed price in writing.

Hangar and large-span doors near Lancaster

Our teams cover Lancaster (LA1) and nearby Morecambe, Fleetwood, Thornton-Cleveleys, along with the rest of Lancashire.

Other services in Lancaster

More about Hangar and large-span doors · industrial doors in Lancaster. Last updated 19 October 2026.