Hangar and large-span doors in North Shields

Quick answer

From a single wide plant-shed door to a full hangar frontage, we can design and fit large-span doors in North Shields, coordinating floor rails, steelwork and controls so the whole opening works as one system.

Town: North Shields
Postcode district: NE30
Area: Tyne and Wear
Survey: Free for new installations

Options that matter on site

Load path. We decide with your structural engineer whether the slab or the structure carries the door's weight.
Safety systems. Large doors move a lot of mass, so warning and detection devices are built in from the start.
Wind resistance. Leaves, guides and fixings designed for the wind load on the closed door.
Refurbishment. Older hangar doors renewed with new wheels, guides, drives and cladding.
Vertical-lift fabric. Tall openings with little side space can use a fabric door that lifts and folds into a compact stack.

What this work can involve

Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.
Designing multi-leaf sliding doors, with a tail-fin cut-out where needed, for a hangar or large-span maintenance building.
Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.

Who is responsible for door safety at a site in North Shields?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Hangar and large-span doors guide prices
Item	Guide price (ex VAT)
Hangar and large-span doors	on survey (typically from £39,995)

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in North Shields

Do you service large doors across Tyne and Wear?

Yes. We service and repair hangar and large-span doors across Tyne and Wear, including running gear, drives, controls and safety devices. Service and repair visits are chargeable and quoted before work starts.

Which hangar door type would suit our building in North Shields?

It depends on headroom, side space, structure and how often the door moves. Sliding doors need side space, vertical-lift fabric doors need headroom, and large sectional doors suit big but not extreme openings. We recommend after survey.

Can you refurbish our existing hangar doors in North Shields?

Often, yes. If the leaves are sound, we renew wheels, guides, drives, cladding and safety devices. Where distortion or corrosion is severe, we explain why replacement may be better value.

Hangar and large-span doors near North Shields

Working in North Shields? We also take on jobs in South Shields, Whitley Bay, Jarrow and across Tyne and Wear.

Other services in North Shields

More about Hangar and large-span doors · industrial doors in North Shields. Last updated 19 October 2026.