Industrial roller shutters in Oban

The short version

We can fit new steel roller shutters and replace old, damaged ones in Oban and across Argyll and Bute, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Oban
Postcode district: PA34
Area: Argyll and Bute
Survey: By arrangement

Options for industrial roller shutters in Oban

Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.

Jobs we can carry out

Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.

Who is responsible for door safety at a site in Oban?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Guide prices apply to mainland UK sites. For Oban, travel and access costs are added and shown in your written quote.

Your questions about industrial roller shutters

Can you supply security-rated shutters in Oban?

Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.

Can you convert our manual shutter in Oban to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

How quickly can a roller shutter be fitted in Oban?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Industrial roller shutters: other towns we cover

Oban (PA34) is covered by arrangement. Travel and access costs for island and remote sites are added and shown in your written quote.

Other services in Oban

More about Industrial roller shutters · industrial doors in Oban. Last updated 19 October 2026.