Door automation and controls in Oban

At a glance

We can automate sectional doors, roller shutters and sliding doors in Oban and across Argyll and Bute, choosing direct, centre or chain-drive motors and the activation method that suits the traffic using each door.

Town: Oban
Postcode district: PA34
Area: Argyll and Bute
Survey: By arrangement

What to specify

Interlocks. Doors linked to each other, to levellers or to the alarm so they work in the right sequence.
Inverter drives. Soft start and stop with faster opening for high-cycle doors.
Matched motors. Direct, centre-mounted, chain-drive or tubular motors sized to the door.
Safety devices. Every automated door gets the detection its risk assessment needs, tested before use.
Traffic lights. Red and green lights and warning beacons for drivers.

Examples of work we can quote for

Converting hand-chained sectional doors to electric operation with push-button controls, safety edges and photocells.
Fitting induction loops and an inverter control panel so forklifts can open a busy internal door without stopping.
Fitting a centre-mounted motor to a roller shutter where a side wall leaves no room at the barrel end.

Powered door rules that apply in Oban

Oban is in Scotland, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Budgeting for door automation and controls in Oban

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Guide prices apply to mainland UK sites. For Oban, travel and access costs are added and shown in your written quote.

Questions from businesses in Oban

Do automated doors in Oban need more maintenance?

Powered doors need their motors, controls and safety devices checked as well as the mechanical parts, so at least an annual service is common practice, more often for busy doors. Servicing visits are chargeable; the survey for an automation job is free.

Can you add interlocks or traffic lights to doors around Argyll and Bute?

Yes. We fit airlock interlocks, door-to-leveller interlocks, traffic lights and warning beacons to new and existing doors across Argyll and Bute, subject to compatibility with the control panels already fitted, and replace panels where they cannot accept the extra inputs.

How much does it cost to make a door electric in Oban?

Our guide price for a manual-to-electric conversion is £1,195 to £3,195 ex VAT, including motor, control panel, basic controls and commissioning. Extra controls and safety devices are priced separately, and your fixed price in Oban follows a free survey.

Door automation and controls: other towns we cover

We take on work in Oban (PA34) by arrangement; timing depends on travel and access, and any extra costs are set out in your quote before you commit.

Other services in Oban

More about Door automation and controls · industrial doors in Oban. Last updated 19 October 2026.