Quick answer
Industrial roller shutters for warehouses, yards, workshops and stores in Devon. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.
- Area
- Devon
- Nation
- England
- Main town
- Exeter
- Survey
- Free for new installations
What to specify
- Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
- Manual override. Powered shutters keep a chain or handle override so they open without power.
- Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
- Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
- Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
What this work can involve
- Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
- Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
- Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.
Who is responsible for door safety at a site in Devon?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Planning the work around your site
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Manual-to-electric conversion | £1,195 – £3,195 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Industrial roller shutters in Devon: your questions
Do you remove old shutters at sites in Devon?
Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.
Does an electric roller shutter at our Devon site need safety devices?
It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.
Can you supply security-rated shutters in Devon?
Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.
Towns in Devon we cover
We cover 9 towns in Devon for industrial roller shutters, including Exeter, Plymouth, Paignton, Torquay.
Other services in Devon
- Door safety upgrades
- Sliding and folding industrial doors
- Fire shutter servicing and drop tests
- Industrial door installation
- Hangar and large-span doors
- Insulated roller shutter doors
- Cold store and freezer doors
- Impact traffic doors
More about Industrial roller shutters. Last updated 19 October 2026.