Industrial roller shutters in Barnstaple

In short

Industrial roller shutters for warehouses, yards, workshops and stores in Barnstaple. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Barnstaple
Postcode district: EX31
Area: Devon
Survey: Free for new installations

What we fit in Barnstaple

Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.

Jobs we can carry out

Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.

Who is responsible for door safety at a site in Barnstaple?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Budgeting for industrial roller shutters in Barnstaple

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

How quickly can a roller shutter be fitted in Barnstaple?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Do you remove old shutters at sites in Barnstaple?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Do you repair roller shutters across Devon?

Yes. We repair most makes of roller shutter across Devon, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Industrial roller shutters near Barnstaple

Our teams cover Barnstaple (EX31) and nearby Bideford, Tiverton, Exeter, along with the rest of Devon.

Other services in Barnstaple

More about Industrial roller shutters · industrial doors in Barnstaple. Last updated 19 October 2026.