Industrial roller shutters in Tiverton

The short version

Roller shutters are a practical choice for sites in Tiverton (EX16): quick to fit, hard-wearing and compact. We supply them in galvanised or colour-coated steel with the controls you need.

Town: Tiverton
Postcode district: EX16
Area: Devon
Survey: Free for new installations

Options that matter on site

Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
Colour finishes. Leave it galvanised or choose a colour that matches the building.

Typical scopes of work

Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.

Who is responsible for door safety at a site in Tiverton?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Sites in and around Tiverton vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Tiverton

Do you repair roller shutters across Devon?

Yes. We repair most makes of roller shutter across Devon, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Does an electric roller shutter at our Tiverton site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you convert our manual shutter in Tiverton to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Tiverton

Tiverton is in the EX16 postcode district in Devon. We also cover Exeter, Taunton, Exmouth.

Other services in Tiverton

More about Industrial roller shutters · industrial doors in Tiverton. Last updated 19 October 2026.