Industrial roller shutters in Bexhill-on-Sea

At a glance

Replacing a tired shutter in Bexhill-on-Sea, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.

Town: Bexhill-on-Sea
Postcode district: TN40
Area: East Sussex
Survey: Free for new installations

What to specify

Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.

Typical scopes of work

Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.

Powered door rules that apply in Bexhill-on-Sea

Bexhill-on-Sea is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Prices for industrial roller shutters in Bexhill-on-Sea

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial roller shutters in Bexhill-on-Sea: your questions

Can you convert our manual shutter in Bexhill-on-Sea to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Do you repair roller shutters across East Sussex?

Yes. We repair most makes of roller shutter across East Sussex, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Does an electric roller shutter at our Bexhill-on-Sea site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Industrial roller shutters near Bexhill-on-Sea

Besides Bexhill-on-Sea, we can survey and quote for sites in Hastings, Hailsham, Eastbourne and the rest of East Sussex.

Other services in Bexhill-on-Sea

More about Industrial roller shutters · industrial doors in Bexhill-on-Sea. Last updated 19 October 2026.