At a glance
Replacing a tired shutter in Brentwood, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.
- Town
- Brentwood
- Postcode district
- CM14
- Area
- Essex
- Survey
- Free for new installations
What to specify
- Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
- Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
- Colour finishes. Plain galvanised or powder-coated to a RAL colour.
- Manual override. If the power fails, the shutter can still be wound open by hand.
- Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.
Typical scopes of work
- Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
- Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
- Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Safety law for industrial doors in England
Industrial doors in Brentwood are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Planning the work around your site
Sites in and around Brentwood vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Manual-to-electric conversion | £1,195 – £3,195 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Does an electric roller shutter at our Brentwood site need safety devices?
It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.
Do you repair roller shutters across Essex?
Yes. We repair most makes of roller shutter across Essex, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.
Can you convert our manual shutter in Brentwood to electric?
Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.
Industrial roller shutters near Brentwood
Working in Brentwood? We also take on jobs in Billericay, Hornchurch, Romford and across Essex.
- Industrial roller shutters in Billericay
- Industrial roller shutters in Hornchurch
- Industrial roller shutters in Romford
- Industrial roller shutters in Basildon
- Industrial roller shutters in Dagenham
- Industrial roller shutters in South Ockendon
Other services in Brentwood
- Door automation and controls
- Door safety upgrades
- Hangar and large-span doors
- Complete loading bays
- Cold store and freezer doors
- Dock leveller and loading bay repairs
- Dock levellers
- Steel personnel and fire exit doors
More about Industrial roller shutters · industrial doors in Brentwood. Last updated 19 October 2026.