Industrial roller shutters in Andover

The short version

Roller shutters are a practical choice for sites in Andover (SP10): quick to fit, hard-wearing and compact. We supply them in galvanised or colour-coated steel with the controls you need.

Town: Andover
Postcode district: SP10
Area: Hampshire
Survey: Free for new installations

Options that matter on site

Colour finishes. Leave it galvanised or choose a colour that matches the building.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Manual override. If the power fails, the shutter can still be wound open by hand.

Jobs we can carry out

Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.

Who is responsible for door safety at a site in Andover?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Prices for industrial roller shutters in Andover

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Can you convert our manual shutter in Andover to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Does an electric roller shutter at our Andover site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

How much is an industrial roller shutter in Andover?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Andover, we confirm a fixed price for your opening in writing.

Industrial roller shutters near Andover

Andover is in the SP10 postcode district in Hampshire. We also cover Winchester, Newbury, Salisbury.

Other services in Andover

More about Industrial roller shutters · industrial doors in Andover. Last updated 19 October 2026.