Industrial roller shutters in Rushden

Quick answer

Roller shutters are a practical choice for sites in Rushden (NN10): quick to fit, hard-wearing and compact. We supply them in galvanised or colour-coated steel with the controls you need.

Town: Rushden
Postcode district: NN10
Area: Northamptonshire
Survey: Free for new installations

Options for industrial roller shutters in Rushden

Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Manual override. If the power fails, the shutter can still be wound open by hand.

What this work can involve

Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.

Safety law for industrial doors in England

Industrial doors in Rushden are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Can you supply security-rated shutters in Rushden?

Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.

Does an electric roller shutter at our Rushden site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you convert our manual shutter in Rushden to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Rushden

Working in Rushden? We also take on jobs in Wellingborough, Kettering, Bedford and across Northamptonshire.

Other services in Rushden

More about Industrial roller shutters · industrial doors in Rushden. Last updated 19 October 2026.