The short version
We can fit new steel roller shutters and replace old, damaged ones in Oxfordshire and across the South East, with strip-out, disposal and any new framing priced up front after a free site survey.
- Area
- Oxfordshire
- Nation
- England
- Main town
- Oxford
- Survey
- Free for new installations
Options for industrial roller shutters in Oxfordshire
- Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
- Manual override. Powered shutters keep a chain or handle override so they open without power.
- Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
- Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
- Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Examples of work we can quote for
- Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
- Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
- Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Who is responsible for door safety at a site in Oxfordshire?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
Most installations in Oxfordshire can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Manual-to-electric conversion | £1,195 – £3,195 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Oxfordshire
Do you remove old shutters at sites in Oxfordshire?
Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.
Does an electric roller shutter at our Oxfordshire site need safety devices?
It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.
Can you convert our manual shutter in Oxfordshire to electric?
Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.
Towns in Oxfordshire we cover
We cover 6 towns in Oxfordshire for industrial roller shutters, including Oxford, Banbury, Abingdon, Bicester.
Other services in Oxfordshire
- Insulated roller shutter doors
- Fire shutters
- High-speed doors
- Complete loading bays
- Sliding and folding industrial doors
- Fire shutter servicing and drop tests
- Industrial door repairs
- Door safety upgrades
More about Industrial roller shutters. Last updated 19 October 2026.