The short version
We can carry out safety upgrades and force testing on industrial doors in Oxfordshire and across the South East, recording every result for your maintenance file and updating each door's risk assessment to match.
- Area
- Oxfordshire
- Nation
- England
- Main town
- Oxford
- Survey
- Free for new installations
What we fit in Oxfordshire
- Light curtains. Full-height multi-beam detection across the whole opening.
- Photocells. If something breaks the beam, the door will not close.
- Warning devices. Lights and sounders make sure people know when a door is about to move.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
- Safety edges. Edges on the closing rail detect contact and send the door back up.
What this work can involve
- Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.
- Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
- Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
Safety law for industrial doors in England
Industrial doors in Oxfordshire are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
How the work is organised
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices for door safety upgrades
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Door safety upgrades in Oxfordshire: your questions
Do our powered doors in Oxfordshire need safety upgrades?
It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.
How long does a safety upgrade take in Oxfordshire?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Will a safety upgrade at our Oxfordshire premises include paperwork?
Yes. We record the devices fitted, the force test results and any changes to the control panel, and update the door's risk assessment, giving you written evidence that the door was checked and upgraded.
Towns in Oxfordshire we cover
We cover 6 towns in Oxfordshire for door safety upgrades, including Oxford, Banbury, Abingdon, Bicester.
Other services in Oxfordshire
- Steel personnel and fire exit doors
- Hangar and large-span doors
- Planned maintenance contracts
- Dock levellers
- Dock shelters and seals
- Industrial door replacement
- Dock leveller and loading bay repairs
- PVC strip curtains
More about Door safety upgrades. Last updated 19 October 2026.