Industrial roller shutters in Banbury

The short version

Roller shutters are a practical choice for sites in Banbury (OX16): quick to fit, hard-wearing and compact. We supply them in galvanised or colour-coated steel with the controls you need.

Town: Banbury
Postcode district: OX16
Area: Oxfordshire
Survey: Free for new installations

Options for industrial roller shutters in Banbury

Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Colour finishes. Leave it galvanised or choose a colour that matches the building.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.

Typical scopes of work

Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.

Who is responsible for door safety at a site in Banbury?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Does an electric roller shutter at our Banbury site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you repair roller shutters across Oxfordshire?

Yes. We repair most makes of roller shutter across Oxfordshire, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Can you convert our manual shutter in Banbury to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Banbury

Banbury is in the OX16 postcode district in Oxfordshire. We also cover Bicester, Daventry, Leamington Spa.

Other services in Banbury

More about Industrial roller shutters · industrial doors in Banbury. Last updated 19 October 2026.