Industrial roller shutters in Llandrindod Wells

Quick answer

Need a tough, space-saving door for a unit in Llandrindod Wells? Single-skin steel roller shutters coil neatly above the opening and can be manual or electric, with security upgrades where your insurer requires them.

Town: Llandrindod Wells
Postcode district: LD1
Area: Powys
Survey: Free for new installations

Options that matter on site

Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.

Jobs we can carry out

Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.

Who is responsible for door safety at a site in Llandrindod Wells?

In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Most installations in Llandrindod Wells can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial roller shutters in Llandrindod Wells: your questions

Does an electric roller shutter at our Llandrindod Wells site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you remove old shutters at sites in Llandrindod Wells?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Can you convert our manual shutter in Llandrindod Wells to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Llandrindod Wells

Our teams cover Llandrindod Wells (LD1) and nearby Newtown, Brecon, Welshpool, along with the rest of Powys.

Other services in Llandrindod Wells

More about Industrial roller shutters · industrial doors in Llandrindod Wells. Last updated 19 October 2026.