Industrial roller shutters in Burton upon Trent

The short version

We can fit new steel roller shutters and replace old, damaged ones in Burton upon Trent and across Staffordshire, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Burton upon Trent
Postcode district: DE14
Area: Staffordshire
Survey: Free for new installations

Options for industrial roller shutters in Burton upon Trent

Manual override. Powered shutters keep a chain or handle override so they open without power.
Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.

Jobs we can carry out

Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.

Safety law for industrial doors in England

Industrial doors in Burton upon Trent are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Keeping your site running during the work

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Budgeting for industrial roller shutters in Burton upon Trent

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Do you remove old shutters at sites in Burton upon Trent?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Can you convert our manual shutter in Burton upon Trent to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Does an electric roller shutter at our Burton upon Trent site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Industrial roller shutters near Burton upon Trent

Our teams cover Burton upon Trent (DE14) and nearby Swadlincote, Derby, Lichfield, along with the rest of Staffordshire.

Other services in Burton upon Trent

More about Industrial roller shutters · industrial doors in Burton upon Trent. Last updated 19 October 2026.