Industrial roller shutters in Redhill

The short version

We can fit new steel roller shutters and replace old, damaged ones in Redhill and across Surrey, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Redhill
Postcode district: RH1
Area: Surrey
Survey: Free for new installations

What we fit in Redhill

Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Manual override. If the power fails, the shutter can still be wound open by hand.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.

Jobs we can carry out

Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.

Safety law for industrial doors in England

Industrial doors in Redhill are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Budgeting for industrial roller shutters in Redhill

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Can you convert our manual shutter in Redhill to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Does an electric roller shutter at our Redhill site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you remove old shutters at sites in Redhill?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Industrial roller shutters near Redhill

Besides Redhill, we can survey and quote for sites in Reigate, Horley, Caterham and the rest of Surrey.

Other services in Redhill

More about Industrial roller shutters · industrial doors in Redhill. Last updated 19 October 2026.