Industrial roller shutters in Castleford

The short version

Roller shutters are a practical choice for sites in Castleford (WF10): quick to fit, hard-wearing and compact. We supply them in galvanised or colour-coated steel with the controls you need.

Town: Castleford
Postcode district: WF10
Area: West Yorkshire
Survey: Free for new installations

Options that matter on site

Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.

What this work can involve

Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.

Safety law for industrial doors in England

Industrial doors in Castleford are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Sites in and around Castleford vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Does an electric roller shutter at our Castleford site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you convert our manual shutter in Castleford to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

How much is an industrial roller shutter in Castleford?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Castleford, we confirm a fixed price for your opening in writing.

Industrial roller shutters near Castleford

Castleford is in the WF10 postcode district in West Yorkshire. We also cover Pontefract, Wakefield, Leeds.

Other services in Castleford

More about Industrial roller shutters · industrial doors in Castleford. Last updated 19 October 2026.