Insulated roller shutter doors in Gerrards Cross

Quick answer

Insulated roller shutter doors for heated workshops, trade units and vehicle bays in Gerrards Cross. We survey the opening, check there is headroom for the coil and fit an electric door that keeps the warmth in and the weather out.

Town: Gerrards Cross
Postcode district: SL9
Area: Buckinghamshire
Survey: Free for new installations

What we fit in Gerrards Cross

Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.

Examples of work we can quote for

Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.

Powered door rules that apply in Gerrards Cross

Gerrards Cross is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Gerrards Cross

Will an insulated roller door cut heating bills at our Gerrards Cross premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

How much does an insulated roller shutter door cost in Gerrards Cross?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Gerrards Cross opening free of charge and then put a fixed price in writing.

How long does insulated roller door installation take in Gerrards Cross?

Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.

Insulated roller shutter doors near Gerrards Cross

Our teams cover Gerrards Cross (SL9) and nearby Uxbridge, Rickmansworth, Slough, along with the rest of Buckinghamshire.

Other services in Gerrards Cross

More about Insulated roller shutter doors · industrial doors in Gerrards Cross. Last updated 19 October 2026.