Insulated roller shutter doors in Fareham

Quick answer

Replacing a draughty roller shutter in Fareham? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.

Town: Fareham
Postcode district: PO16
Area: Hampshire
Survey: Free for new installations

What we fit in Fareham

Weather seals. Seals along the guides, head and bottom rail stop wind-driven rain and cold air getting in.
Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
Safety devices. Every powered door gets the safety functions its risk assessment calls for and is tested before handover.
Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.

Examples of work we can quote for

Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.

Who is responsible for door safety at a site in Fareham?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Sites in and around Fareham vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Fareham: your questions

Can you replace our old roller shutter in Fareham with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Does a powered insulated roller door in Fareham need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Is there enough headroom for an insulated roller door at our Fareham unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

Insulated roller shutter doors near Fareham

Fareham is in the PO16 postcode district in Hampshire. We also cover Gosport, Portsmouth, Waterlooville.

Other services in Fareham

More about Insulated roller shutter doors · industrial doors in Fareham. Last updated 19 October 2026.