Quick answer
We can fit foam-filled insulated roller doors in Havant and across Hampshire, from small service doors to wide goods openings, with the drive, seals and controls chosen for how each door is actually used.
- Town
- Havant
- Postcode district
- PO9
- Area
- Hampshire
- Survey
- Free for new installations
What we fit in Havant
- Electric drive. Tubular or external geared motors with a manual override for power cuts.
- Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.
- Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
- Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
- Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
Examples of work we can quote for
- Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
- Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
- Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Powered door rules that apply in Havant
Havant is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Planning the work around your site
If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.
Budgeting for insulated roller shutter doors in Havant
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about insulated roller shutter doors
Will an insulated roller door cut heating bills at our Havant premises?
It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.
Does a powered insulated roller door in Havant need safety devices?
If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.
How long does insulated roller door installation take in Havant?
Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.
Insulated roller shutter doors near Havant
Working in Havant? We also take on jobs in Waterlooville, Portsmouth, Gosport and across Hampshire.
- Insulated roller shutter doors in Waterlooville
- Insulated roller shutter doors in Portsmouth
- Insulated roller shutter doors in Gosport
- Insulated roller shutter doors in Fareham
- Insulated roller shutter doors in Chichester
- Insulated roller shutter doors in Ryde
Other services in Havant
- Complete loading bays
- Sliding and folding industrial doors
- Impact traffic doors
- Fire shutter servicing and drop tests
- Hangar and large-span doors
- Dock levellers
- PVC strip curtains
- Cold store and freezer doors
More about Insulated roller shutter doors · industrial doors in Havant. Last updated 19 October 2026.