Insulated roller shutter doors in Boston

At a glance

We can fit foam-filled insulated roller doors in Boston and across Lincolnshire, from small service doors to wide goods openings, with the drive, seals and controls chosen for how each door is actually used.

Town: Boston
Postcode district: PE21
Area: Lincolnshire
Survey: Free for new installations

What to specify

Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.
Electric drive. Tubular or external geared motors with a manual override for power cuts.
Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.

Jobs we can carry out

Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.

Who is responsible for door safety at a site in Boston?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Budgeting for insulated roller shutter doors in Boston

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about insulated roller shutter doors

Will an insulated roller door cut heating bills at our Boston premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Do you repair insulated roller doors across Lincolnshire?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Lincolnshire. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

Does a powered insulated roller door in Boston need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Insulated roller shutter doors near Boston

Our teams cover Boston (PE21) and nearby Spalding, Skegness, Wisbech, along with the rest of Lincolnshire.

Other services in Boston

More about Insulated roller shutter doors · industrial doors in Boston. Last updated 19 October 2026.