Insulated roller shutter doors in Sutton-in-Ashfield

The short version

Insulated roller doors suit premises in Sutton-in-Ashfield that need better thermal performance without giving up roof space. We supply, fit and commission them, and can service them afterwards on a schedule.

Town: Sutton-in-Ashfield
Postcode district: NG17
Area: Nottinghamshire
Survey: Free for new installations

Options for insulated roller shutter doors in Sutton-in-Ashfield

Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.

Jobs we can carry out

Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.

Who is responsible for door safety at a site in Sutton-in-Ashfield?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about insulated roller shutter doors

How much does an insulated roller shutter door cost in Sutton-in-Ashfield?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Sutton-in-Ashfield opening free of charge and then put a fixed price in writing.

Will an insulated roller door cut heating bills at our Sutton-in-Ashfield premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

How long does insulated roller door installation take in Sutton-in-Ashfield?

Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.

Insulated roller shutter doors near Sutton-in-Ashfield

Working in Sutton-in-Ashfield? We also take on jobs in Kirkby-in-Ashfield, Mansfield, Alfreton and across Nottinghamshire.

Other services in Sutton-in-Ashfield

More about Insulated roller shutter doors · industrial doors in Sutton-in-Ashfield. Last updated 19 October 2026.