Insulated roller shutter doors in Jarrow

At a glance

We can fit foam-filled insulated roller doors in Jarrow and across Tyne and Wear, from small service doors to wide goods openings, with the drive, seals and controls chosen for how each door is actually used.

Town: Jarrow
Postcode district: NE32
Area: Tyne and Wear
Survey: Free for new installations

What to specify

Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Compact coil. The curtain coils above the opening, leaving ceilings free for lights and sprinklers.
Colour choice. Powder-coated RAL finishes to match cladding and building trims.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.

Examples of work we can quote for

Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.

Safety law for industrial doors in England

Industrial doors in Jarrow are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Does a powered insulated roller door in Jarrow need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Will an insulated roller door cut heating bills at our Jarrow premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Can you replace our old roller shutter in Jarrow with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Insulated roller shutter doors near Jarrow

Working in Jarrow? We also take on jobs in Hebburn, Wallsend, South Shields and across Tyne and Wear.

Other services in Jarrow

More about Insulated roller shutter doors · industrial doors in Jarrow. Last updated 19 October 2026.