The short version
We can carry out safety upgrades and force testing on industrial doors in Thatcham and across Berkshire, recording every result for your maintenance file and updating each door's risk assessment to match.
- Town
- Thatcham
- Postcode district
- RG19
- Area
- Berkshire
- Survey
- Free for new installations
What to specify
- Warning devices. Lights and sounders make sure people know when a door is about to move.
- Records. Written results and updated risk assessment for your files.
- Photocells. If something breaks the beam, the door will not close.
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
- Force testing. We measure how hard the door closes and record the results at each test point.
Typical scopes of work
- Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
Who is responsible for door safety at a site in Thatcham?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Prices for door safety upgrades in Thatcham
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about door safety upgrades
How long does a safety upgrade take in Thatcham?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Do you upgrade doors from other installers across Berkshire?
Yes. We upgrade safety devices on most makes of powered door across Berkshire, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.
How much does a door safety upgrade cost in Thatcham?
Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Thatcham.
Door safety upgrades near Thatcham
Our teams cover Thatcham (RG19) and nearby Newbury, Basingstoke, Reading, along with the rest of Berkshire.
- Door safety upgrades in Newbury
- Door safety upgrades in Basingstoke
- Door safety upgrades in Reading
- Door safety upgrades in Didcot
- Door safety upgrades in Andover
- Door safety upgrades in Wokingham
Other services in Thatcham
- Hangar and large-span doors
- Fire shutters
- Dock levellers
- Door automation and controls
- Impact traffic doors
- Planned maintenance contracts
- Cold store and freezer doors
- Steel personnel and fire exit doors
More about Door safety upgrades · industrial doors in Thatcham. Last updated 19 October 2026.