At a glance
Door safety upgrades for powered roller shutters, sectional doors and sliding doors in Derby. We force-test the door, assess how it is used and fit the safety edges, photocells or light curtains it needs.
- Town
- Derby
- Postcode district
- DE1
- Area
- Derbyshire
- Survey
- Free for new installations
What we fit in Derby
- Fall protection. Spring-break, cable-break and anti-fall devices against suspension failure.
- Force testing. We measure how hard the door closes and record the results at each test point.
- Light curtains. Many beams from floor to head detect people and vehicles anywhere in the opening.
- Records. Written results and updated risk assessment for your files.
- Safety edges. Pressure-sensitive or optical edges that stop and reverse the door on contact.
Examples of work we can quote for
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
- Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
Safety law for industrial doors in England
Industrial doors in Derby are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Access, phasing and timing
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Budgeting for door safety upgrades in Derby
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Do our powered doors in Derby need safety upgrades?
It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.
Can you force-test our doors in Derby?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
Will a safety upgrade at our Derby premises include paperwork?
Yes. We record the devices fitted, the force test results and any changes to the control panel, and update the door's risk assessment, giving you written evidence that the door was checked and upgraded.
Door safety upgrades near Derby
Derby is in the DE1 postcode district in Derbyshire. We also cover Belper, Ilkeston, Heanor.
- Door safety upgrades in Belper
- Door safety upgrades in Ilkeston
- Door safety upgrades in Heanor
- Door safety upgrades in Ripley
- Door safety upgrades in Long Eaton
- Door safety upgrades in Burton upon Trent
Other services in Derby
- Insulated roller shutter doors
- Industrial door motor replacement
- Hangar and large-span doors
- Sliding and folding industrial doors
- Door automation and controls
- Cold store and freezer doors
- Industrial door repairs
- Industrial roller shutters
More about Door safety upgrades · industrial doors in Derby. Last updated 19 October 2026.