In short
Door safety upgrades for powered roller shutters, sectional doors and sliding doors in Banbridge. We force-test the door, assess how it is used and fit the safety edges, photocells or light curtains it needs.
- Town
- Banbridge
- Postcode district
- BT32
- Area
- Down
- Survey
- Free for new installations
What we fit in Banbridge
- Records. You receive a record of the devices fitted and the tests carried out.
- Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
- Safety edges. Pressure-sensitive or optical edges that stop and reverse the door on contact.
- Light curtains. Full-height multi-beam detection across the whole opening.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
Typical scopes of work
- Adding anti-fall devices to heavy roller shutters identified in a workplace risk assessment review.
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
Powered door rules in Northern Ireland
Banbridge is in Northern Ireland, where workplace safety is regulated by HSENI under the Health and Safety at Work (Northern Ireland) Order 1978. The Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993 and PUWER (Northern Ireland) 1999 require occupiers to keep powered doors safe and maintained. Under the Windsor Framework, EU machinery rules and CE marking continue to apply to powered doors placed on the market here, with the EU Machinery Regulation 2023/1230 applying from 20 January 2027.
Keeping your site running during the work
Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.
Guide prices for door safety upgrades
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Our door at our Banbridge site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Do our powered doors in Banbridge need safety upgrades?
It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.
Can you force-test our doors in Banbridge?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
Door safety upgrades near Banbridge
Our teams cover Banbridge (BT32) and nearby Craigavon, Lurgan, Portadown, along with the rest of County Down.
- Door safety upgrades in Craigavon
- Door safety upgrades in Lurgan
- Door safety upgrades in Portadown
- Door safety upgrades in Newry
- Door safety upgrades in Armagh
- Door safety upgrades in Lisburn
Other services in Banbridge
- Industrial door replacement
- Dock shelters and seals
- Fire shutters
- Industrial door repairs
- Industrial roller shutters
- Bollards and door protection
- Sliding and folding industrial doors
- Industrial door motor replacement
More about Door safety upgrades · industrial doors in Banbridge. Last updated 19 October 2026.