At a glance
Door safety upgrades for powered roller shutters, sectional doors and sliding doors in Hammersmith. We force-test the door, assess how it is used and fit the safety edges, photocells or light curtains it needs.
- Town
- Hammersmith
- Postcode district
- W6
- Area
- Greater London
- Survey
- Free for new installations
Options for door safety upgrades in Hammersmith
- Safety edges. Edges on the closing rail detect contact and send the door back up.
- Light curtains. Full-height multi-beam detection across the whole opening.
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
- Warning devices. Lights and sounders make sure people know when a door is about to move.
- Panel upgrades. Control panels with monitored safety inputs where older ones fall short.
Examples of work we can quote for
- Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
- Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
Safety law for industrial doors in England
Industrial doors in Hammersmith are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Access, phasing and timing
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Budgeting for door safety upgrades in Hammersmith
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Door safety upgrades in Hammersmith: your questions
Our door at our Hammersmith site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
How long does a safety upgrade take in Hammersmith?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Do our powered doors in Hammersmith need safety upgrades?
It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.
Door safety upgrades near Hammersmith
Besides Hammersmith, we can survey and quote for sites in Shepherd's Bush, Fulham, Chiswick and the rest of Greater London.
- Door safety upgrades in Shepherd's Bush
- Door safety upgrades in Fulham
- Door safety upgrades in Chiswick
- Door safety upgrades in Notting Hill
- Door safety upgrades in Barnes
- Door safety upgrades in Putney
Other services in Hammersmith
- Hangar and large-span doors
- Impact traffic doors
- Sectional overhead doors
- Industrial door repairs
- Cold store and freezer doors
- Steel personnel and fire exit doors
- Fire shutter servicing and drop tests
- High-speed doors
More about Door safety upgrades · industrial doors in Hammersmith. Last updated 19 October 2026.