Door safety upgrades in Richmond

The short version

Busy doors in Richmond (TW9) that close automatically need reliable detection. A full-height light curtain stops the door before it touches anyone, with a safety edge on the bottom rail as back-up.

Town: Richmond
Postcode district: TW9
Area: Greater London
Survey: Free for new installations

What to specify

Panel upgrades. Control panels with monitored safety inputs where older ones fall short.
Records. You receive a record of the devices fitted and the tests carried out.
Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
Safety edges. Edges on the closing rail detect contact and send the door back up.
Force testing. Closing forces measured against BS EN 12453 limits and recorded.

What this work can involve

Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.

Who is responsible for door safety at a site in Richmond?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices

Door safety upgrades guide prices
Item	Guide price (ex VAT)
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door
Repair visit (attendance and first hour)	£145 – £195

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about door safety upgrades

Do our powered doors in Richmond need safety upgrades?

It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.

Will a safety upgrade at our Richmond premises include paperwork?

Yes. We record the devices fitted, the force test results and any changes to the control panel, and update the door's risk assessment, giving you written evidence that the door was checked and upgraded.

Our door at our Richmond site has a bypassed safety edge. What should we do?

Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.

Door safety upgrades near Richmond

Besides Richmond, we can survey and quote for sites in Twickenham, Isleworth, Hounslow and the rest of Greater London.

Other services in Richmond

More about Door safety upgrades · industrial doors in Richmond. Last updated 19 October 2026.