Quick answer
Older door control panels may not accept modern monitored safety devices. At premises in Welling, we can replace them where needed, adding inverter control and better fault diagnostics in the same visit.
- Town
- Welling
- Postcode district
- DA16
- Area
- Greater London
- Survey
- Free for new installations
What we fit in Welling
- Warning devices. Lights and sounders make sure people know when a door is about to move.
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
- Records. You receive a record of the devices fitted and the tests carried out.
- Light curtains. Many beams from floor to head detect people and vehicles anywhere in the opening.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
Typical scopes of work
- Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
- Adding anti-fall devices to heavy roller shutters identified in a workplace risk assessment review.
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
Safety law for industrial doors in England
Industrial doors in Welling are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Keeping your site running during the work
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices for door safety upgrades
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Door safety upgrades in Welling: your questions
Do you upgrade doors from other installers across Greater London?
Yes. We upgrade safety devices on most makes of powered door across Greater London, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.
How long does a safety upgrade take in Welling?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Our door at our Welling site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Door safety upgrades near Welling
Welling is in the DA16 postcode district in Greater London. We also cover Bexleyheath, Bexley, Sidcup.
- Door safety upgrades in Bexleyheath
- Door safety upgrades in Bexley
- Door safety upgrades in Sidcup
- Door safety upgrades in Eltham
- Door safety upgrades in Woolwich
- Door safety upgrades in Thamesmead
Other services in Welling
- Dock levellers
- Hangar and large-span doors
- Cold store and freezer doors
- Impact traffic doors
- Sliding and folding industrial doors
- Industrial door repairs
- Fire shutters
- Steel personnel and fire exit doors
More about Door safety upgrades · industrial doors in Welling. Last updated 19 October 2026.